• The foot control is used to operate the machine. Never place
other objects on the foot control.
• Do not use the machine if it is wet.
• If the LED lamp is damaged or broken, it must be replaced by
the manufacturer or its service agent or a similarly qualified
person, in order to avoid a hazard.
SAVE THESE INSTRUCTIONS
• If the cord connected with the foot control is damaged, it must
be replaced by the manufacturer or its service agent or a
similarly qualified person, in order to avoid a hazard.
The machine must only be used with foot control of type
manufactured by ZHEJIANG FOUNDER MOTOR CORPORATIONFC-2902D (220-240V area)
LTD. (China)/ 4C-316Q manufactured by Wakaho Electric Ind. Co., Ltd. (Vietnam)(110-125V area)
To Next Page
