Singer Multi - Appliance Description; How to Use the Appliance; Operating Instructions

3
ENGLISH
Note!
• Do not use this item for more than 10 seconds continuously. Leave to cool for 1 minute
and use again.
• Do not operate the item with the bowl empty.
DESCRIPTION OF THE APPLIANCE
USE
Before fi rst use clean all parts of the appliance (see cleaning and maintenance).
• Place the cutting accessory on the axis and then pour the ingredients.
• Place the motor on the secured with the lid bowl.
• Plug the appliance and start the function by pressing the ON button while gently pressing
downwards the motor unit.
• This appliance is for intermittent use only. You should make short pauses of 1 minute,
after every 10 seconds of use.
• When the procedure is complete, release the ON button, disconnect the appliance from
the power supply and wait until the cutting blades are fully stopped.
• Remove the motor unit, the lid, the cutting accessory and fi nally empty the mixture.
• The ON button has two speeds:
1. Speed 1: slow blade rotation (minimum).
2. Speed 2: fast blade rotation (maximum).
• Tip: For the mixing and cutting of ingredients, star by pressing the ON button gradually.
ON button / 2 speed selection
Motor unit
Lid
Blade
Bowl
Axis