Press a 1” hem into a knit fabric.
Lift the Presser Foot to the highest
position.
Position the fabric right side up and under
the needles.
Align the fabric so that that the fabric fold is
1” to the right of the needles.
Lower the Presser Foot.
Turn the handwheel to assist in the stitch
forming on the fabric. When sewing the
Cover Hem Stitch it is necessary to have
fabric under the needles while sewing. Sew
off onto a scrap fabric.
Sew using the seam guides for a straight
hem and to ensure the fabric’s raw edge is
finished.
As the machine sews it will finish the fabic’s
raw edge and sew three rows of topstitching.
Cover Hem Wide page 12
To Next Page
Loading...
