7
Before removing the button and fabric from the machine, set machine
to straight stitch. Leave width at current setting and stitch in place for
three stitches. This forms a tie-off on the back side to secure the button.
Apply a liquid fray-preventer on the backside of fabric on the knots.
Trim threads after they dry, being careful not to cut thread knots.
Note:
Note: Note:
Note: Remember to raise the feed dogs when finished.
Use decorative buttons to tie-off a quilt or wall hanging!
For a thread shank, place a needle or toothpick on the button and stitch.
To Next Page
Loading...
