Singer S14-77 User Manual (English)

Questions and Answers:

D
dwardAug 15, 2025
Why does the thread keep breaking on my Singer S14-77?
- M
  matthewsmithAug 15, 2025
  Thread breakage in your Singer Sewing Machine can occur due to several reasons. It could be that the machine isn't threaded correctly, or the thread is not unwinding smoothly from the spool. Other potential causes include a bent, dull, or broken needle, incorrect needle insertion, poor quality thread, thread tension set too tight, or the thread getting caught in one of the thread guides. Check the threading path, replace the needle if necessary, use good quality thread, and ensure the thread spool isn't getting caught. Also, make sure the thread tension isn't too tight.
S
Sara LeAug 18, 2025
What to do if my Singer Sewing Machine is skipping stitches?
- M
  Melissa DennisAug 18, 2025
  Skipping stitches on your Singer Sewing Machine might be caused by several factors. The needle could be bent, dull, or broken, or it may not be properly seated in the needle clamp. The needle size might also be incorrect for the fabric. Additionally, the machine may not be threaded correctly, or you might be using poor-quality thread. Try replacing the needle, ensuring it's correctly inserted, using the right size needle for your fabric, checking the threading, and using good quality thread.
D
danielsjoelAug 21, 2025
What to do if fabric does not feed well on Singer S14-77 Sewing Machine?
- K
  karenvillegasAug 21, 2025
  If the fabric isn't feeding well through your Singer Sewing Machine, the stitch length might be too short for the fabric. Increase the stitch length setting. Also, the differential feed might not be set correctly for the fabric. Adjust the differential feed. The presser foot pressure might also be incorrectly set. Adjust the presser foot pressure.
B
Bruce MartinezAug 25, 2025
How to fix fabric not feeding properly on Singer S14-77?
- T
  Tom OconnorAug 26, 2025
  If the fabric isn't feeding well through your Singer Sewing Machine, it might be due to a few reasons. First, the stitch length might be too short for the fabric, so increase the stitch length setting. You may also need to adjust the differential feed to the correct position for the fabric. Also, check the presser foot pressure and adjust it appropriately for the fabric being sewn.
A
Adam PerezAug 28, 2025
What to do if my Singer Sewing Machine is jamming fabric?
- A
  Anthony CastilloAug 28, 2025
  Fabric jams in your Singer Sewing Machine can occur if the upper and lower fabric cutters are not in the proper position. Check the alignment of the cutters. Another cause could be the thread not unreeling smoothly off the thread spool. Check the thread spool. Also, too much fabric thickness can cause jams. Compress thick layers with a conventional sewing machine before sewing on your overlock machine.
K
Kristin HillSep 1, 2025
Why is the needle breaking on my Singer S14-77?
- K
  kelly66Sep 1, 2025
  A broken needle on your Singer Sewing Machine can occur if the needle isn't properly seated in the needle clamp. Ensure the needle is fully inserted into the clamp and the screw is tightened securely. Another cause could be manually pulling the fabric, which deflects the needle. Avoid pulling the fabric; let the feed teeth draw it through. Finally, the needle size might not be correct for the fabric. Use a needle size compatible with the fabric you're sewing.
C
Crystal RichardsonSep 4, 2025
How to prevent fabric puckering with my Singer Sewing Machine?
- C
  Christopher HardinSep 4, 2025
  Fabric puckering when using your Singer Sewing Machine can be caused by thread tensions being too tight. Loosen the thread tensions. Other possible causes include the thread not unreeling smoothly off the spool, using poor quality thread, stitch length set too short, or the differential feed not set correctly. Check the thread spool, use good quality thread, adjust the stitch length, and adjust the differential feed.
K
Kelli RobinsonSep 7, 2025
Why is my Singer S14-77 Sewing Machine making irregular stitches?
- R
  Rhonda AlexanderSep 8, 2025
  Irregular stitches from your Singer Sewing Machine can stem from a few issues. The stitches might not be balanced, or the thread might not be unreeling smoothly from the spool. Also, the machine may not be threaded correctly. Try adjusting the thread tensions, checking the thread spool, and ensuring the machine is threaded correctly.
C
corey32Sep 12, 2025
Why is my Singer S14-77 trimming irregularly?
- H
  Hannah MeyersSep 12, 2025
  Irregular trimming with your Singer Sewing Machine could be due to the upper and lower fabric cutters not being in the proper position. Check the alignment of the cutters. Alternatively, the cutter(s) may be damaged or worn out. Replace one or both cutters.

Singer S14-77 Specifications

General

Maximum Stitch Length	4 mm
Differential Feed	Yes
Free Arm	Yes
Differential Feed Range	0.7 - 2.0
Built-in Needle Threader	No
Drop-in Bobbin	No
Stitch Types	Overlock, Rolled Hem
Number of Needles	1
Stitch Width	5 mm
Type	Overlock