Singer Scholastic Plus - Attaching Ribbon with a Twin Needle; Machine Setup: Twin Needle for Ribbon Attachment; Materials for Ribbon Attachment; Procedure: Attaching Ribbon with Twin Needle

42
Attaching Ribbon with a
Twin Needle
By using a Twin Needle, two parallel rows of stitches can be used to
attach a ribbon while stitching.
Machine Set-Up:
Stitch: Straight Stitch
Stitch Width: 0, no width
Stitch Length: 5
Presser Foot: Transparent Satin Foot or Standard Foot
Needle: Twin Needle
Materials:
5” x 5” piece of lightweight woven fabric, with a stabilizer ironed-on
6” long piece of 1/4” wide satin ribbon
Procedure:
 Insert the second spool pin.
 Both spools of thread follow the same threading path until they reach
the eye of the needle. Thread each needle separately.
 Insert the ribbon through the hole in the presser foot. Pull the ribbon
under the foot and then to the back of the foot.
 Slowly sew a row of stitching on the right side of the fabric.
 Maintain a slow consistent speed to ensure accurate stitching.