Singer SE017 - Page 3

• Switchthesewingmachineo(“0”)whenmakinganyadjustmentintheneedlearea,suchas
threading needle, changing needle, threading bobbin, or changing presser foot, etc.
• Never drop or insert any object into any opening.
• Do not use outdoors.
• Donotoperatewhereaerosol(spray)productsarebeingusedorwhereoxygenisbeing
administrated.
• Todisconnect,turnallcontrolstotheo(“0”)position,thenremoveplugfromoutlet.
• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
• The foot control is used to operate the machine. Never place other objects on the foot control.
• Do not use the machine if it is wet.
• If the LED lamp is damaged or broken, it must be replaced by the manufacturer or its service
agentorasimilarlyqualiedperson,inordertoavoidahazard.
• If the cord connected with the foot control is damaged, it must be replaced by the
manufactureroritsserviceagentorasimilarlyqualiedperson,inordertoavoidahazard.
For Overlock Machines only:
• Never operate without cutter cover or coverstitch table is securely installed.
SAVE THESE INSTRUCTIONS
3