Singer SE017 - Accessories; Included Accessories; Connecting Power Supply; Foot Control and Power Cord

Accessories
1. 2-thread converter
2. Needlepackincludingtwoneedles,size#14/90.Two
needles,size#14/90,areinthemachineondelivery.
3. Screwdriver
4. Tweezers
5. Lint brush
6. Sparelowerknife
7 Waste tray
Connecting the foot control and the
power supply
Foot control to use with this machine:
- Type GTC/HKT 72C for 220-240V manufactured by
DANYANG GUOTI MOTOR & APPLIANCE CO., LTD /
ZHEJIANG HUAXING ELECTRIC MOTOR CO., LTD.
- Type GTE/HKT 7 for 100-120V manufactured by DANYANG
GUOTI MOTOR & APPLIANCE CO., LTD /ZHEJIANG
HUAXING ELECTRIC MOTOR CO., LTD.
Before plugging your machine in, make sure the voltage
is the same as indicated on the plate under the machine.
Specicationsvaryfromcountrytocountry.
1. Connectthefootcontrol/electricpowercordtothesocket
on the machine.
2. Plug the power cord plug into the electric outlet.
3. Pushthepowerswitchto“-”toturnonthemachine.
4. Press the foot control to start sewing. Use the foot control
to adjust the sewing speed. The harder you press, the faster
the machine will sew. To stop the machine from sewing,
remove your foot from the control.
5. Pushthepowerswitchto“O”toturnothemachine.
Note: When the front cover is open the safety switch is
activated and prevents the machine from sewing, even if the
foot control is pressed.
Note: Your overlock machine is adjusted to provide the best
stitch result at normal room temperature. Extreme hot and cold
temperaturescanaectthesewnresult.
POLARIZED PLUG INFORMATION
(FOR U.S.A. & CANADA ONLY)
Thisappliancehasapolarizedplug(onebladewiderthan
theother).Toreducetheriskofelectricshock,thisplugis
intendedtotinapolarizedoutletonlyway.Iftheplug
doesnottfullyintheoutlet,reversetheplug.Ifitstill
doesnott,contactaqualiedelectriciantoinstallthe
proper outlet. Do not modify the plug in any way.
6
1
2
3
4
5
6
7