9
ENGLISH
TROUSERS
For woolen items, use a damp cloth if necessary. Press the waist and the belt
pleats on the side of the board. You can use the pressing cushion according to
the pleats. Press, then open, etc turning the waist around the side of the board.
Place the cloth fl at on the left-hand side of the board, adapting it to the shape
of the board. Press and open. Repeat the same for the second leg.
Lay the front pleat fl at on the board starting with the upper part. The seams
must be on the edge of the board as any pressure on them could result in
marks or luster. Press and open
Other Techniques
Placing the press cloth between the fabric and the Pressing Plate may help
with delicate fabrics
Buttons and Zippers: if you have older types of buttons or zippers, you may
need to take care to avoid melting. In order to do so, place the item face down
and cover with a pressing cloth before pressing.
Spray bottles may be used by spraying the fabric lightly. This will further help to
remove stubborn wrinkles. Place a damp cloth over the fabric before pressing,
which will help with stubborn wrinkles or heavy gauge fabrics.
To press large pieces of fabric, place the entire piece in the storage area
behind the Ironing Board. Pull the fabric towards you, over the Ironing Board
and lower the Pressing Plate. Press the fabric in section until completed.
To Next Page
Loading...
Need help?
General
