How to remove flakes from Singer SteamLogic Iron?
If flakes and impurities are coming out of the soleplate holes of your Singer Iron during ironing, it is because you have been using hard water. Perform Self-Cleaning one or more times.
What to do if my Singer Iron is leaking water from the soleplate?
If your Singer Iron leaks water from the soleplate, it could be due to several reasons. First, the iron's heat setting might be too low to produce steam; in this case, set the temperature to the maximum position using the Temperature Control Dial. Another cause may be that the Steam Selector is in the ‘ON’ position; turn the Steam Selector to the off position. Finally, you might be pressing the Steam Burst Button too many times and too quickly; press it slower and only 2-3 times.
Why is my Singer SteamLogic Iron not releasing steam?
If your Singer Iron is not releasing steam, it could be due to low water in the Water Tank. Fill the Water Tank using the instructions in this manual. Alternatively, the Steam Selector may be in the Steam Off position; turn it to the Steam ON position.
What to do if my Singer SteamLogic Iron is plugged in but the soleplate is cold?
If your Singer Iron's soleplate is cold even when plugged in, first, check if the electrical outlet is working by plugging it into another outlet. Second, check if the plug is properly inserted in the outlet. Finally, the temperature setting may be set too low; set the temperature to a higher setting.
What to do if my Singer Iron's steam burst is not working?
If the steam burst function on your Singer Iron isn't working, it could be due to low water in the Water Tank, so fill the Water Tank using the instructions in this manual. If it's the first time you're using the function, press the Burst of Steam Button a few times until steam is released.
What to do if my Singer Iron is damaging fabric?
If your Singer Iron is damaging fabric, the temperature setting may be too high. Follow the garment guide or test the inside of the garment before ironing, and adjust the temperature setting accordingly.
Why is my Singer Iron soleplate too cool?
If your Singer Iron's soleplate is too cool, the temperature setting may be incorrect. Turn the Temperature Control Dial until you reach the correct (higher) temperature setting.
What to do if my Singer SteamLogic Iron is not spraying mist?
If your Singer Iron is not releasing spray mist, it could be due to low water in the Water Tank, so fill the Water Tank using the instructions in this manual. If it's the first time you're using it, press the Spray Button a few times until the spray mist is released.
Instructions to reduce the risk of death by electric shock during appliance use.
Precautions to reduce risks of fire, electric shock, or injury during appliance use.
Description of the iron's control panel, settings, and indicators.
Steps to prepare the steam iron before its initial operation.
Instructions for filling the water tank with tap water before use.
Guide on adjusting temperature settings for different fabric types.
Overview of temperature settings for various fabric types.
How to use steam function during ironing for better results.
Guide to burst of steam, vertical steaming, and spray functions.
Details on the auto shut-off feature and draining the water tank.
Information on self-cleaning, anti-drip, and anti-scale systems.
How to clean the soleplate and the iron body.
Practical advice for effective and safe ironing.
Details on the warranty period for electronic and other parts.
Conditions and limitations that apply to the warranty coverage.
General| Type | Steam Iron |
|---|---|
| Model | SteamLogic |
| Vertical Steam | Yes |
| Self-Cleaning | Yes |
| Features | Anti-Drip, Anti-Calc, Auto Shut-Off |
| Voltage | 220-240V |
To Next Page