17
space to avoid falls, and far from other heat sources, far from flammable materials
(curtains, liquids, gas cylinders, etc.), and far from tanks of liquids.
• The power socket must not be above or below the appliance, it must be easily
accessible so that the plug can be removed easily in an emergency.
• After use and once fully cooled, the appliance can be stored either on a horizontal
support surface or vertically on a wall using the dedicated key slot (install on wall), or
handing using the hook at the end (hand steaming): when choosing, also consider
the necessary space required. Use of the slot requires a suitable
Ø4.2mm screw, Ø8.2mm cylindrical
head, long enough for the head to
extend 18mm from the wall, and for
the screwed in part to support at least
9 kg without the corresponding hole
become deformed or the screw
coming out. If using the hook, it must
hang on a round cross-section bar
(Ø45mm max) and must support a
weight of at least 7 kg.
The appliance consists of the parts indicated in Fig. 1 and described here:
To Next Page
Loading...
