Need help?Do you have a question about the SingularXYZ SV100 and is the answer not in the manual?
Details GNSS engine, anti-jamming tech, web UI, Bluetooth app, and rugged design.
Lists available antennas for different customer needs.
Explains the function of four LED indicators on the front panel.
Illustrates how the SV100 connects as a base station or CORS reference station.
Details accessing the web server via Ethernet for configuration and remote access.
Displays basic receiver information such as serial number, hardware, and firmware versions.
Displays lists and visual plots of tracked satellites, including system, PRN, azimuth, and elevation.
Provides GNSS constellation tracking, coordinates, positioning status, and time information.
Displays current working mode, memory capacity, and battery status.
Configures satellite elevation cutoff and enables/disables specific satellite systems.
Allows selection of operating modes: Rover, Base station, or Single point positioning.
Allows modification of the receiver's Ethernet IP address, subnet mask, and gateway.
Enables or disables Dynamic Domain Name Server (DDNS) services for remote access.
Configures NAT-DDNS services like NATAPP and NGROK for dynamic domain name resolution.
Configures antenna height and measurement, and selects external antenna type.
Allows changing the login password for the receiver's web interface.
Enables permanent or temporary use by entering a registration code.
Introduces methods for data transmission: serial port, TCP, and NTRIP.
Configures data transmission via the serial COM port, including baud rate and data type.
Configures data transfer over the internet using TCP Server or TCP Client modes.
Details support for NTRIP protocols, including client, server, and caster functions for correction data.
Configures the receiver to acquire correction data from CORS via the NTRIP Client protocol.
Configures the receiver to broadcast correction data as a base station using the NTRIP Server protocol.
Configures the receiver to act as a single reference station using the NTRIP Caster protocol.
Configures data recording settings, storage modes, and formatting for static data.
Enables remote download of recorded data when DDNS or NAT-DDNS modes are active.
Explains how to connect the receiver via USB to access data like a flash disk.
Provides functions for rebooting or resetting the receiver to factory defaults.
Details the process of updating the receiver's firmware using a ZIP file.
General| Static Accuracy (Horizontal) | 2.5 mm + 0.5 ppm |
|---|---|
| Static Accuracy (Vertical) | 5 mm + 0.5 ppm |
| Tilt Compensation | Yes |
| Internal Memory | 8 GB |
| Battery Life | Up to 10 hours |
| Waterproof/Dustproof | IP67 |
| Signal Tracking | GPS, GLONASS, Galileo, BeiDou |
| Data Format | RTCM 2.x, RTCM 3.x, CMR |
| Positioning Accuracy (Horizontal) | 8 mm + 1 ppm |
| Positioning Accuracy (Vertical) | 15 mm + 1 ppm |
| Connectivity | Bluetooth, Wi-Fi, USB |
| Operating Temperature | -40°C to 65°C |
To Next Page