To Next PageTo Next Page
Need help?Do you have a question about the SINO 361 and is the answer not in the manual?
General safety guidelines and precautions for operating the cutting plotter.
Details on checking the contents of the packing box upon receipt.
List of included accessories with the cutting plotter.
Identification and quantity of parts required for assembling the machine stand.
Step-by-step instructions for assembling the machine stand.
Instructions for setting up the machine in a suitable environment and connecting cables.
Procedures and components for installing cutting and plotting tools.
Steps for installing the cutter holder or plotter holder into the tool carrier.
Guidance on maximizing cutter lifespan and adjusting its protruding length.
Instructions for installing the necessary USB drivers for connecting the plotter.
Configuration of the COM port within the Artcut software for communication.
Identification and description of the components of the cutting plotter.
Detailed explanation of the functions of each button on the control panel.
Procedures for turning on the machine, installing media, and performing trial cuts.
Detailed instructions for operating the machine, including reset, online, and offline modes.
Using the copy function and performing tasks after work is completed.
Common reasons for deformed or incomplete patterns and how to resolve them.
Identifying and fixing issues causing the machine to plot abnormally.
Causes and solutions for the paper moving incorrectly during the plotting process.
Reasons for missing parts, depth differences, or ripples in letter cuts.
General