Need help?Do you have a question about the Sinovo SD200 Series and is the answer not in the manual?
General| Series | SD200 |
|---|---|
| Control Mode | V/F control |
| Input Voltage | 3-phase 380V |
| Output Voltage | 0~Input Voltage |
| Communication | Modbus |
| Protection Functions | Overcurrent, Overvoltage, Undervoltage, Overheating, Short Circuit, Overload |
| Operating Temperature | -10°C |
| Dimensions | Varies by model within the series (see datasheet) |
Provides specific safety precautions for different stages like installation, wiring, and operation.
Lists power capacity, input/output current, and adaptable motor for the SD200 series.
Details key technical specifications like frequency, control modes, and overload capacity.
Details environmental conditions required for installing the AC drive.
Provides main circuit and control circuit wiring diagrams for the AC drive.
Explains keypad display states (stopping, running, fault) and operation procedures.
Provides instructions for reading function lists, parameter radix, and password protection.
Covers advanced functions, protection settings, and serial communication.
Recommends EMC filters, reactors, and magnetic rings for input/output cables.
Provides treatment methods for common EMC interference types like leakage and communication issues.
Outlines daily maintenance tasks, routine cleaning, and periodic inspections.
Provides instructions and a table for identifying and resolving specific faults.
Offers step-by-step troubleshooting guides for common motor and drive issues.
To Next Page
