6
SAFETY INSTRUCTIONS….cont
CAUTION: The warnings and cautions mentioned in this user manual can not cover all possi-
ble conditions and situations that may occur. It must be understood by the operator that
common sense and caution are factors which cannot be built into this product, but must be
applied.
DO NOT use the fan outdoors.
Always check all guards to make sure they are secure before starting the fan.
Never insert fingers or any other object/s through the grill guard when the fan is in
operation.
Never leave the fan unattended and ensure that children and pets are kept a safe
distance from the fan.
Turn the fan off and disconnect it from the mains supply when moving from one lo-
cation to another.
Turn the fan off and disconnect it from the mains supply when carrying out any re-
pairs, maintenance or cleaning.
Do not use petrol or other corrosive liquids for cleaning as they may damage the fan
or outer casing.
Never modify the fan in any way.
Never operate the fan without all guards in place.
Before each use; always check that the moving parts move freely and do not catch
or bind.
Stop operation immediately if abnormalities are noticed.
Always clear the surface around where the fan is to be used to avoid unwanted dust
or debris being pulled through the fan.
If a problem with the ventilator fan is experienced, or if the mains lead or plug be-
come damaged, contact your distributor for repair.
If the fan is used in a place of work all rules and laws etc. relating to the use of porta-
ble electrical appliances should be followed.
ELECTRICAL CONNECTION
WARNING! It is the responsibility of the owner and the operator to read, understand
and comply with the following:
You must check all electrical products, before use, to ensure that they are safe.
You must inspect power cables, plugs, sockets and any other connectors for wear or
damage.
You must ensure that the risk of electric shock is minimised by the installation of appro-
11
EXPLODED DIAGRAM
10" Ventilator Fan 12" Ventilator Fan
No. Description SIP Part No. SIP Part No.
1 Guard PW10-00010 PW10-00017
2 Fan blade PW10-00011 PW10-00018
3 Motor support PW10-00012 PW10-00019
4 Motor PW10-00012 PW10-00019
5 Casing PW10-00013 PW10-00020
6 Handle PW10-00014 PW10-00014
7 Switch PW10-00015 PW10-00015
8 Rubber foot PW10-00016 PW10-00016
N/A Capacitor PW10-00037 PW10-00040
To Next Page
Loading...