SIP DISC 300 S ALP User Manual (English)

Need help?

Do you have a question about the SIP DISC 300 S ALP and is the answer not in the manual?

SIP DISC 300 S ALP Specifications

General

Brand	SIP
Model	DISC 300 S ALP
Category	Lawn Mower
Language	English

Summary

General Safety Instructions

General Safety Precautions

General safety instructions and precautions for safe operation.

Tractor Mounted Machines Safety

Safety guidelines for mounting and dismounting the machine.

PTO Shaft Drive Safety

Hydraulic System Safety

Hydraulic Connections and Safety

Maintenance Procedures

1.4 Calculation of Tractor Ballast

2. Preparing

2.1 Special Safety Instructions

Safety precautions before and during machine preparation.

2.2 Attaching to the Tractor

Procedure for connecting the mower to the tractor's three-point linkage.

2.2.3 Parallel Linkage Adjustment and Grass Cut Height Adjustment

2.3 PTO Shaft

2.3.2 PTO Shaft Length Adjustment

2.3.3 Mounting the PTO Shaft

2.4 Hydraulic Connection

2.5 Installation of Cord into Tractor Cabin

3. Preparation of Mower for Mowing

3.1 Adjusting the Cutter Bar Ground Pressure Relief System

Adjusting the mechanical ground pressure relief system for optimal performance.

4. Putting Mower in Working and Transport Position

Putting the Mower into the Transport Position

Putting the Mower from Transport to Operating Position

5. Mowing

5.1 Raising the Cutter Bar When Changing Rows

5.2 Lateral Adjustment of Cutter Bar According to Terrain

5.3 Caution When Mowing on Slopped Terrain

Safety warnings and procedures for mowing on slopes.

5.5 Disconnecting Mower from Tractor

6. Maintenance and Periodical Checks

6.1 Special Safety Instructions

Safety precautions for maintenance and repair work.

6.3 Replacing Blades

Procedure for replacing worn or damaged mower blades.

SIP DISC 300 S ALP User Manual

Table of Contents