Need help?Do you have a question about the SIRI Maxi Bella 75 and is the answer not in the manual?
This manual contains information concerning storage, transport, installation, use, supervision and maintenance of the machine.
This manual has been written to allow the user to become familiar with the machine and provides instructions for fundamental maintenance operations.
These instructions fall within standard working practices that operators must observe towards the machine.
Explains pictographs related to operator qualification levels (A, B, C).
Lists safety pictographs used on the machine and in the manual.
Instructions on how to adjust the flow of water to the disc using taps and knobs.
General rules and importance of maintenance for machine performance and longevity.
Describes extra-duty maintenance performed by qualified technicians.
Information on proper disposal and scrapping of the machine and packaging materials.
Preliminary checks and procedures required before the initial machine start-up.
Steps for activating the electrical supply and water pump for operation.
Specifies that the machine is designed for one operator, with others at a safe distance.
Ensures safety devices are in place and working at the start of each shift.
Instructions on how to stop the machine by flicking the switch to the '0' position.
Describes the MAXI BELLA 75 and 105 cutters for linear, diagonal and 45° cuts on various materials.
Details technical characteristics of the machine, including design and operational aspects.
Provides an exact description of the model, serial number and year of manufacture for customer assistance.
Details the operational procedures for cutting with the machine.
Provides key technical specifications for Maxi Bella 75 and 105 models.
Lists the types of diamond-tipped discs that can be fitted to the machine.
Provides sound pressure and power levels, and advice on noise reduction.
User responsibilities for installation, including area, electricity, and grounding.
Requirements for sufficient and appropriate lighting in the installation area.
Illustrates the necessary space layout for the machine's installation zone.
Instructions for assembling the machine, including fitting the feet and cable carrier.
Guidelines for making electrical connections safely and correctly.
Details uses that are forbidden, including operating with guards removed or incorrect installation.
Describes the machine's safety features: power switch, disc guard, and splash guard.
Highlights residual risks and required Personal Protection Equipment (PPE) during operation.
Instructions for safely lifting and transporting the machine, including pallet handling.
Guidelines for storing the machine in a covered area, protected from weather and chemicals.
Advises adhering to country-specific rules for disposing of packaging materials.
To Next Page
General