Operation
78
Recalling Channel Presets
The 10 presets in the active bank (A, B, or C) can be selected by pressing the 0 – 9 buttons.
Press the B
AND button to activate the preset bank you want. The selected bank is
shown in the lower-right corner of the default display screen. The ST5 will tune to
the last-tuned preset in the selected bank.
Press the desired preset button 0 – 9 to tune to a different preset in the bank. The
channel will change and the display will revert to the Default screen for the new
channel, with the preset bank and number shown in the lower-right corner.
Pressing and holding the B
AND button displays the MY PRESETS screen (see below).
My Presets Screen
You can use the Channel UP/DOWN buttons to quickly see what’s playing on all of your
presets:
Press and hold the B
AND button to activate the MY PRESETS screen (see
Figure 64
).
Use the Channel UP/DOWN buttons to scroll through the presets. When the preset
you want to listen-to is highlighted, press the Select button to listen to it.Pressing
the Channel UP/DOWN buttons will cycle through all of the stored presets by pre-
set bank and number (for example, A1, A2...B1, B2...C1, C2...). Pressing the Channel
UP/DOWN buttons after the last stored preset is displayed will return back to the
fi rst stored preset.
1.
2.
1.
2.
Figure 64
To Next Page
Loading...
Need help?
General
