How to fix Sirius XM RAdio XM Onyx Car Receiver when it is acquiring signal?
To ensure your Sirius XM RAdio Car Receiver acquires a signal, verify that your vehicle is outdoors with a clear view of the sky. Also, confirm that the Magnetic Mount Antenna is mounted outside of the vehicle and moved away from any obstructed areas.
Why does my Sirius XM RAdio XM Onyx Car Receiver audio fade or have static?
If the audio on your Sirius XM RAdio Car Receiver fades or has static, it's likely due to interference from another commercial or broadcast FM station. To resolve this, find an unused FM channel in your area. If you're using PowerConnect, try connecting the audio using the Aux In Cable or a Cassette Adapter. As another option, consider using an FM Direct Adapter.
What to do if there is no audio when using the Aux In Cable or Cassette Adapter on Sirius XM RAdio XM Onyx?
If you're experiencing no audio with your Sirius XM RAdio Car Receiver when using the Aux In Cable or Cassette Adapter, check all cables between your unit and your vehicle’s stereo system to ensure they are firmly and securely connected. Also, make sure you have selected the correct input source on your vehicle’s stereo system and increase the audio level of your Sirius XM RAdio Car Receiver. If you are using the Vehicle Dock that came with the Universal Xpress Car Kit, ensure that the FM Transmitter in OnyX is turned Off.
Why is there no audio when using PowerConnect or FMDA on my Sirius XM RAdio XM Onyx?
If you're not getting any audio when using PowerConnect or FMDA with your Sirius XM RAdio Car Receiver, first check that your unit and your vehicle’s FM radio are tuned to the same FM channel. If you're using PowerConnect, make sure you're using the PowerConnect Vehicle Dock and PowerConnect Power Adapter. If you are using the Vehicle Dock that came with the Universal Xpress Car Kit, ensure that the FM Transmitter in OnyX is turned On.
What to do if Sirius XM RAdio XM Onyx Car Receiver says 'Check Antenna Connection'?
If your Sirius XM RAdio Car Receiver displays a 'Check Antenna Connection' message, it's most likely that the Magnetic Mount Antenna cable has been damaged. Turn your Sirius XM RAdio Car Receiver Off, then On, to reset this message. If the issue persists, replace the antenna.
Sirius XM RAdio XM Onyx: why do I not receive all the channels to which I subscribed?
To resolve this issue with your Sirius XM RAdio Car Receiver, first ensure that you have subscribed to the service by following the steps in 'Subscribe' on page 48. If you have subscribed, go to https://care.siriusxm.com/retailrefresh_view.action and follow the directions to refresh your Radio. For further assistance, call 1-800-967-2346.
How to stop the demo from playing on Sirius XM RAdio XM Onyx?
If the demo is playing on your Sirius XM RAdio Car Receiver, it could be because your Magnetic Mount Antenna is not connected or you are not receiving the signal. To exit Demo Mode, press and hold the Select button for 10 seconds. You can also disable Demo Mode.
Why does the audio sound too soft on my Sirius XM RAdio XM Onyx?
If the audio from your Sirius XM RAdio Car Receiver sounds too soft, raise the volume of your stereo system or increase the audio level of your unit until the sound quality improves.
What to do if Sirius XM RAdio XM Onyx says 'Channel Off Air'?
If your Sirius XM RAdio Car Receiver displays 'Channel Off Air', tune to another channel.
General| Brand | Sirius XM RAdio |
|---|---|
| Model | XM Onyx |
| Category | Car Receiver |
| Language | English |
Guidelines for safe operation and device maintenance.
Guidance on selecting an optimal mounting location in the vehicle.
Instructions for attaching the dash or vent mount to the vehicle.
Steps to properly mount the magnetic antenna on the vehicle exterior.
Options and instructions for connecting audio output to the vehicle's stereo.
Steps to activate the XM service by phone or online.
Solutions for issues related to signal acquisition.
Troubleshooting steps for antenna connection problems.
To Next Page
