To Next PageTo Next Page
Need help?Do you have a question about the Sirmex Kapriol SP series and is the answer not in the manual?
Explains the working principle of the SP bending machine, including motor, reduction gear, and central plate.
Details the operation of the STP combined machine, highlighting distinct bending and cutting zones.
Identifies buttons and indicators on the control panel for machine operation.
Steps for powering up the machine and checking the motor rotation direction.
Key maintenance points: safety, parts replacement, checks, and vendor recommendations.
Details on lubricant type, quantity, application, and intervals for optimal performance.
Steps to clean the machine's working surface and mechanical components.
Procedure for cleaning the working plane-gearbox-motor group.
Detailed list of parts for the reduction gear assembly.
Detailed list of parts for the cutting arm.
List of available accessories for the machines.
General