EasyManua.ls Logo

Sirocco REMOTE ECO 1 User Manual

Default Icon
15 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
PLEASE KEEP THESE INSTRUCTIONS IN A
SAFE PLACE FOR FUTURE REFERENCE
USER INSTALLATION & SERVICE MANUAL
FOR: -
REMOTE ECO 1& 2
DECORATIVE FUEL EFFECT APPLIANCE
THIS IS NOT A “DO-IT-YOURSELF” PRODUCT
THIS IS A NATURAL GAS (G20) APPLIANCE
FOR USE IN GB AND IE ONLY AT A SUPPLY
PRESSURE OF 20mbar.
Our policy is one of constant development and improvement.
Strict accuracy of illustrations and specifications is not guaranteed.
Modifications to design and materials may be necessary subsequent to publication.
Tel: (01282) 441 771
eco
VII-11-09
Question and Answer IconNeed help?

Do you have a question about the Sirocco REMOTE ECO 1 and is the answer not in the manual?

Sirocco REMOTE ECO 1 Specifications

General IconGeneral
LocationIndoor
ModelREMOTE ECO 1
ColorBlack
Heat Output3 kW
Remote ControlYes
MaterialSteel
Fuel TypeEthanol
Burn Time4-5 hours

Summary

Important Safety and Installation Warnings

General Safety and Installation Precautions

Critical warnings about installation safety, hearth, clearances, and materials.

User Section Overview

Operating Instructions Overview

Guidance on lighting, adjusting flame level, and turning the appliance off.

Oxygen Depletion System and Servicing

Oxygen Depletion System Function

Explanation of the ODS function, safety shutdown, and troubleshooting.

Installation Section Guidelines

Installation Procedures and Checks

Spillage and Final Checks

Spillage Check Procedure

Testing for smoke spillage into the room to ensure chimney draft is adequate.

Maintenance Spares and Fault Finding

Fault Finding Guide

Table of common faults, their possible causes, and recommended remedies.

Functional Checks for Ignition

Ignition Functional Check 1

Troubleshooting guide for when the burner will not light.

Ignition Functional Check 2

Troubleshooting guide specifically for scenarios where there is no spark.

Flame Failure Functional Check

Related product manuals