Troubleshooting
6
Low Suction or Poor Pick Up
Possible causes Remedies
1. Disposable dust bag is full 1. Dispose current disposable bag and replace with new
2. Wand is not properly installed 2. Secure wand properly to ensure no air leaks
3. Tool not working properly
4. Air path obstructed
3 Make sure tool is on the wand properly and tightly
4. Check for any air ow obstructions
Vacuum motor is not working
Possible causes Remedies
1. Vacuum is not plugged in 1. Check to make sure vacuum is plugged in properly
2. Electrical Outlet is not working 2. Check electrical source
3. Motor thermal protector activated due to blockage 3. Allow cleaner to cool down, and check the vacuum ducts
and lters for blockage.
4. ON/OFF switch fault
5 Motor defective
4. Contact an Authorized Service Center.
5. Contact an Authorized Service Center.
WARNING:
To reduce the risk of re, electric
shock, or injury,turn power
OFF and disconnect plug from
electrical outlet before performing
maintenance or troubleshooting.
To Next Page
Loading...