Need help?Do you have a question about the Sirus I-Amp 8.150 and is the answer not in the manual?
General| Channels | 8 |
|---|---|
| Signal-to-Noise Ratio | >100dB |
| Total Harmonic Distortion | <0.05% |
| Power Output (RMS) | 150W per channel @ 4Ω |
| Frequency Response | 20Hz - 20kHz |
| Damping Factor | >200 |
Explains the meaning of symbols and signal words used for warnings and safety within the document.
Details the product's intended use, user qualifications, and critical safety warnings including electrical hazards and child safety.
Lists the features and technical specifications for the Sirus I-Amp 4.500 model.
Lists the features and technical specifications for the Sirus I-Amp 8.150 model.
Covers rack mounting, connecting input signals, and speaker outputs for both amplifier models.
Details how to select operating modes for the Sirus I-Amp 4.500 using DIP switches.
Describes the front panel controls and rear panel connectors for the Sirus I-Amp 4.500.
Describes the front panel indicators and rear panel connectors for the Sirus I-Amp 8.150.
Provides detailed technical specifications for the Sirus I-Amp 4.500, including performance and environmental data.
Provides detailed technical specifications for the Sirus I-Amp 8.150, including performance and environmental data.
Explains balanced vs. unbalanced transmission and provides advice on cable selection for optimal audio quality.
Instructions on how to clean the device's fan grids safely and effectively.
Guidelines for environmentally responsible disposal of packaging and the old device.
To Next Page
