7 / 8
4. Control
1. Before you turning on the power switch, please make sure the mixer is turned on and the input
signal is turned to minimum. Please turn the knob of VOLUME, TREBLE and BASS to
minimum.
2. Power the unit on.
3. During operation, please make sure that the speakers always sound well. When distortions
can be heard, either amplifier or speakers are overloaded. Overloads can be quickly caused to
damages of amplifier or speaker.
4. After usage, set VOLUME, TREBLE and BASS controls to the left stop position, then turn off
power switch.
5. Technical data
Frequency
Frequency response 20 Hz – 20 kHz
Sensitivity
SPL max. 89 dB
Components
Transducer MF 5,25“
Transducer HF 1“
Technical data
Capacity 30 W
Type 2 Way 5“ Fullrange LS
Hardware
Dimensions (L/B/H) 175 x 180 x 244 mm (per LS)
Weight 5 kg (pair)
To Next Page
Loading...
