The SISIGAD Model A06 is an electric self-balancing hoverboard, also referred to as a smart balance wheel. It is designed for personal entertainment and domestic use, not for public roads or motor vehicle lanes.
Function Description:
The hoverboard operates on the principle of dynamic equilibrium, utilizing internal gyroscopes and acceleration sensors. It adjusts its balance based on the rider's center of gravity, controlled by a servo control system. Leaning forward accelerates the hoverboard, while shifting the body's center of gravity left or right facilitates turning. The device includes a self-balance function for ease of driving. It is crucial to learn how to drive safely before operating at high speeds, as failing to maintain control or violating user manual rules can lead to injury. The hoverboard is not designed for sudden starts or stops, driving on steep slopes, or against fixed objects. It should only be used in dry weather conditions, avoiding rain, snow, ice, or slippery surfaces.
Important Technical Specifications:
- Model: A06
- Wheel Size: 6.5 inches
- Motor: Dual 300W
- Max Range: 10 km
- Battery Power: DC 36V/2AH
- Charging Time: 4-5 hours
- Range of Rider's Weight: 20-90 KG (44-200 LBS)
- Weight Range for Best Experience: 20-70 KG (44-154 LBS)
- Working Temperature: -10°C to 50°C
- Charging Temperature: 0°C to 35°C
- Stored Relative Humidity: 5% - 85%
- Maximum Speed: Rated at 14km/h, but can exceed 15km/h under optimal conditions (fully charged battery, level or downward-angled surface, tailwind, light rider). The hoverboard emits a warning signal when approaching maximum speed, and it is recommended to drive at speeds comfortable to the user, not exceeding 12km/h.
Usage Features:
- Calibration: If the hoverboard pulls to one side, it may need recalibration. This involves shutting down the scooter, pressing the power button for over 10 seconds until the light flashes 5 times, then shutting down again.
- Operation: To operate, press the power button to turn it on. Place one foot on a pedal to trigger the pedal switch and activate the operation indicator, then place the other foot on the pad once the system enters self-balancing mode. Control movement by shifting body weight; abrupt movements should be avoided. If not in a balanced condition when triggering the foot-switch, a buzzer will alarm, and a warning LED will light, indicating the system is not self-balanced.
- Safety Alarms: The hoverboard will not operate under several conditions: system errors (indicated by alarms and flashing lights), platform tilt exceeding 10 degrees, low battery voltage, during charging, upside-down platform, over-speeding, tire stall (leading to power-off after two seconds), battery voltage below protection value (leading to power-off after 15 seconds), or continuous large current discharge (e.g., climbing steep slopes).
- Battery Indicators: A green light indicates sufficient power, while a red light signifies low battery (15-20% left), prompting the user to stop and recharge. A red light with a warning alarm sound indicates the battery is critically low, requiring immediate cessation of driving to prevent injury and damage.
- Riding Practice: Users should practice in open spaces with someone ready to assist until they can easily get on and off. Casual, flat shoes and non-loose clothing are recommended.
- Safety Precautions: Always wear a helmet, knee pads, elbow pads, and other protective gear. Avoid loose clothing or shoelaces that could get caught. The hoverboard is for single-person use only. Do not drive under the influence of alcohol or other substances. Maintain good vision and be alert to surroundings. Keep knees slightly bent for balance on uneven ground. Always keep feet on the pedals. Avoid driving in dimly lit or dark places, or on obstacles like cloth, small branches, and stones. Jumping on or off the hoverboard can cause damage and voids warranty. "Trick riding" is not covered.
Maintenance Features:
- Charging: The battery should be fully charged before initial use. Only use the supplied charger. Do not charge if the temperature is below 5°C or above 45°C. Disconnect the charger once the battery is fully charged to prevent overcharging, which can reduce battery life. Charging should not exceed three hours. Never charge without supervision. The product should be partially charged (20-50%) if stored for extended periods or shipped from the factory.
- Battery Care: Do not use the battery if it emits odor, excessive heat, or leaks. Disassembly of the battery is prohibited. Avoid touching any leaking substance and keep children and animals away from the battery. The battery pack consists of lithium batteries.
- Cleaning: Ensure the power and charge coil are off. Wipe the hoverboard's shell with a soft cloth. Prevent water or other liquids from entering internal parts to avoid permanent damage to electronics/batteries and personal injury.
- Storage: Store the hoverboard indoors in a dry and suitable environment, away from flammable materials. Optimal storage temperature is 25°C, with a range of 5°C to 30°C. If stored below 0°C, move it to a warmer environment (5-30°C) before charging. Do not store in direct sunlight or near open fire. Allow the hoverboard to cool down for at least one hour after use before charging or packing. Do not leave it in a warm car in the sun.
- Warranty: Opening the hoverboard is forbidden and will void the warranty.
- Manufacturer: Shenzhen Uni-chic Technology Co., Ltd.
- Address: Dormitory Building 101, No. 50, Xingqiao Road, Longxin Community, Longgang District, Shenzhen, Guangdong, CHINA.
- Certifications: SGS, US, FC, RoHS, 801021.
- Origin: Made in CHINA.
Need help?
General
To Next Page
