DART SEPT ‘12
7
Tines
The following Tines are available for use with the Dart. Maximum depth for all tines is 100mm
CHISEL TINES - REF. 2109
These encourage new root growth and permit the entry of fertilisers and dressing.
ROUND POINTED SOLID TINES - REF. 6278
Used to assist moisture and air getting to the grass roots during the growing season.
HOLLOW CORING TINES - REF. 2107 and 36447
These remove cores of soil to relieve compaction caused by play and rolling and to
exchange soil. In areas where compaction is severe use round solid tine treatment -
say 4-6 weeks before hollow tining to allow moisture to penetrate the compacted layer.
PENCIL TINE - REF. 34257
Has all the benets of the solid tine, but is more acceptable on greens because of the
smaller surface hole. These tines are not as strong as the tapered tine so care must be
taken on outeld turf or where stony ground is prevalent.
TINE SPACING = 50MM
NOTE
36447
Ø16mm
2107
Ø12.5mm
To Next Page
Loading...
