7
• The green Ready/Treatment - indicator light (I) illumi-
nates when pressing the ON/OFF switch.
• The green StandBy - indicator light (G) illuminates
when the device is turned o.
• The yellow System Error - indicator light (H) illumi-
nates when a system error/malfunction occurs.
First wash your face with your favorite cleanser. Apply
Sisloy Serum and massage your skin for 30 seconds to
1 minute. Make sure the skin is clean and dry.
Press the Power On/O Switch. The green Ready/
HOW TO USE
Treatment Indicator Light (I) will start blinking, and
shortly afterwards will be lit steadily. After you turn
it on, the heating process will start quickly; however
there is no need to wait, just place the treatment
probe on your skin and the red light will automatically
activate, it only activates when it’s in full contact with
your skin.
Apply light pressure while slowly moving the Sisloy
Facelift in an upward motion.
Treat each area for 5 to 7 minutes. A single Sisloy
Facelift session usually takes 15-20 minutes in which
you should gently glide the Sisloy Facelift applicator
slowly over the desired treatment area. During the
To Next Page
Loading...