Sit 630 EUROSIT 120 - User Manual

630 EUROSIT 120°C
ENGLISH - ITALIANO - DEUTSCH
Read the instructions before use. This control must be installed in accord a n c e w i t h t h e r u l e s i n f o rce.
Leggere le istruzioni prima dell’uso. Questo controllo deve essere installato in accordo con le normative in vigore.
Lesen Sie die Anleitungen vor dem Gebrauch. Das Mehrfachstellgerät muss nach den geltenden Vorschriften installiert werden.
9.956.632 01
430114
Dati sintesi ordine
N° ordine. . .
9005267 O1
Fornitore. . .
104389 ESSEGI SYSTEM SERVICE SRL
Spedire a. . .
49190002 SIT LA PRECISA S.P.A.
Descrizione/ Costo Costo Costo
Cod. articolo Quantità Volume Unit totale
SCHEDA CCIETK 5,00 5,0000 1.200,00
SCHEDA ALIMENTATORE 5,00 5,0000 125,00
Tot.
10,0000 1.325,00
Imponibile ac.
1.325,00
@
20,000
Im
265,00
Tot. ordine
1.590,00
F24=Altri tasti funzione
9956632_01_630 eurosit 120_locke1 1 11/10/2010 14.32.32

Summary

Instructions for Use and Installation

Main Characteristics

Lists key features and functions of the 630 EUROSIT control, including its application and power requirements.

Working Diagram

Illustrates the functional flow of the gas control system with labeled components.

Technical Data

Specifies technical parameters according to European standard EN 126 for gas-burning appliances.

Thermostat Regulation Specifications

Details thermostat regulation limits and on-off function performance.

Gas Flow

Operation

Ignition of Pilot Flame

Step-by-step guide to safely lighting the pilot flame and ensuring it remains lit.

Temperature Selection

Instructions on how to set the desired operating temperature using the control knob.

Stand By Position

Procedure to maintain the pilot flame while the main burner is closed.

Extinguishing

Steps to safely turn off the appliance by turning the knob to the 'Off' position.

Installation

Safety Warnings

Critical safety instructions regarding valve modification, interference, and component removal.

Mechanical Connections

General recommendations for gas pipe connections, torques, and handling.

Component Check

Instructions to verify the presence of essential components like adjustment screws before assembly.

Gas Connections

Main Gas Connection

Details on connecting main gas inlet/outlet pipes using threaded fittings or nut and olive.

Pilot Burner Connection

Instructions for connecting the pilot burner pipe using appropriate fittings.

Remote Command Fitting

Settings and Adjustments

Maximum and Minimum Outlet Flow Adjustment

Procedures for adjusting the maximum and minimum gas outlet flow rates.

Pilot Flow Adjustment

Adjusting and overriding the gas flow to the pilot burner.

Changing Gas Family;Group

Procedures for adapting the device to different gas families or groups.

Maintenance

Accessories

Sit 630 EUROSIT 120 Specifications