This measurement is what you need to set your mitre saw in order to create
the correct cut.
FIG. 4
Maintenance and Service
For safe and proper working, always keep the measuring tool clean.
Do not immerse the measuring tool into water or other fluids.
Wipe off debris using a moist and soft cloth.
Do not use any cleaning solvents.
If the measuring tool should fail despite the care taken in manufacturing and
testing procedures, repair should be carried out by an authorized after-sales
service centre for this tool.
In all correspondence and spare parts orders, please always include the
10-digit article number given on the type plate of the measuring tool.
DISPOSAL
Multi-detectors, accessories and packaging should be sorted for
environments-friendly recycling.
Environmental Protection
Waste electrical products should not be thrown away with
household waste.
Please recycle where facilities exist.
Check with your local authority or retailer for recycling advice.
To Next Page
Loading...