Site Digital Angle Finder

To Next Page

Digital Angle Finder

Item No. 25814

INSTRUCTION MANUAL

Please read and retain for future reference.

FIG. 1

1. Fold-out leg 10. End cap/battery lid

2. Joint cover 11. Contact edge

3. Base leg DISPLAY ELEMENTS

4. “ON/OFF” button a. Reading

5. “Mitre” button b. Low battery indicator

6. “HOLD” button c. Mitre(MTR) indicator

7. LCD Display d. Hold(HOLD) indicator

8. Spirit level for horizontal alignment

9. Spirit Level for vertical alignment

Need help?

Do you have a question about the Site Digital Angle Finder and is the answer not in the manual?

Summary

Safety Rules

Technical Data

Preparation and Setup

Inserting;Replacing Battery

Instructions for inserting or replacing the 9V battery in the device.

Operation

Switching On and Off

How to turn the digital angle finder on and off, including auto-shutoff.

Measuring Angles

Procedure for measuring angles using the fold-out and base legs.

Retaining Measured Value (Hold)

How to hold/freeze the displayed reading using the HOLD button.

Transferring Angle to Mitre Angles

Converting measured angles to mitre cut angles using the MTR button.

Maintenance and Disposal

Disposal and Environmental Protection

Guidelines for proper disposal and environmental care of the product.