• Destination IP Address: This is the destination subnet IP address.
• Subnet Mask: It is the destination IP addresses based on above
destination subnet IP
• Destination Port Number: This is the Port or Port Ranges that defines
the application.
• Protocol: It is the packet protocol type used by the application, select
either TCP or UDP or ICMP
• Rule Unmatched: Select action for the traffic unmatching current rule;
Forward to leave it pass through, and NEXT to check it by the next rule.
IP Filter Listing
• #: Item number.
• Active: Whether the connection is currently active.
• Src IP Mask: The source IP address or range of packets to be monitored.
• Dest IP Mask: This is the destination subnet IP address.
• Src port: This Port or Port Ranges defines the port allowed to be used by
the Remote/WAN to connect to the application. Default is set from range
0 ~ 65535. It is recommended that this option be configured by an
advanced user.
• Dest Port: This is the Port or Port Ranges that defines the application.
• Protocol: It is the packet protocol type used by the application, select
either TCP or UDP or ICMP
To Next Page
Loading...
