E |3
9 Bring up the WLR-6000
Connect the supplied power-adapter to the power inlet port and connect it to
a wall outlet. Switch the WLR-6000 on by flipping the switch on the back of
the device. The WLR-6000 automatically enters the self-test phase. During
self-test phase, the Power LED will be lit continuously to indicate that this
product is in normal operation.
10 Initial Setup WLR-6000
LOGIN procedure
1. OPEN your browser (e.g. Internet Explorer).
2. Type http://192.168.0.1 in the address bar and press [Enter]
To Next Page
Loading...
