Need help?Do you have a question about the Sitecom WLX-3000B and is the answer not in the manual?
Button used to reset the device to its default settings.
Indicates the status of the wireless network connection.
Indicates the power status of the device.
Indicates the status of the wired Ethernet connection.
Connects the power adapter to the device.
Connects the device to the network via an Ethernet cable.
Use the provided template to mark screw locations for mounting.
Slide the access point onto the installed screws.
Button used to reset the device to its default settings.
Indicates the status of the wireless network connection.
Indicates the power status of the device.
Indicates the status of the wired Ethernet connection.
Connects the power adapter to the device.
Connects the device to the network via an Ethernet cable.
Use the provided template to mark screw locations for mounting.
Slide the access point onto the installed screws.
General| Modulation | - |
|---|---|
| Frequency band | 2.4 GHz |
| Number of users | - user(s) |
| Channels quantity | - channels |
| Networking standards | IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3af |
| Ethernet LAN data rates | 10, 100 Mbit/s |
| Maximum data transfer rate | 300 Mbit/s |
| Antenna type | Internal |
| Antennas quantity | 2 |
| Antenna gain level (max) | 3 dBi |
| Certification | ROHS, CE |
| Product color | White |
| Security algorithms | 128-bit WEP, 64-bit WEP, WEP, WPA, WPA2, WPA2-PSK, WPS |
| AC input voltage | 220 - 240 V |
| Ethernet LAN (RJ-45) ports | 1 |
Weight and Dimensions| Width | 125 mm |
|---|---|
| Height | 65 mm |
| Weight | 194 g |
To Next Page
