Need help?Do you have a question about the sitrex DM 6 and is the answer not in the manual?
Detailed list of spare parts for the DM-6 model.
Detailed list of spare parts for the DM-7 model.
Detailed list of spare parts for the DM8 S model.
Additional spare parts for DM8 S.
General spare parts breakdown illustration.
General spare parts breakdown illustration.
General spare parts breakdown illustration.
Spare parts for the DM 6-7 S Cardan Shaft.
Spare parts for the DM8 S Cardan Shaft.
Explains the terms and conditions of the manufacturer's warranty.
Identifies hazardous symbols and their meanings for safety.
Explains various operational indicator symbols for use.
Specifies tractor compatibility criteria for the machine.
Lists technical specifications for different machine models.
Explains how to identify the machine via its data plate.
Provides general notes and examples for assembly procedures.
Step-by-step guide for assembling the machine from packaging.
Guide for connecting the machine to the tractor's linkage.
Steps to set the correct working height of the machine.
Instructions for connecting and ensuring the drive shaft's correct length.
Procedure for preparing the machine for road transport.
Steps to deploy the machine from transport to operational mode.
Operational guidelines for using the disc mower effectively and safely.
Steps for safely detaching the machine from the tractor.
How to adjust and maintain proper belt tension for operation.
Method for adjusting the machine's cutting height.
Procedure for setting the hydraulic flow for smooth operation.
How to adjust the spring tension for optimal performance.
Information on the function and adjustment of the safety mechanism.
Addresses issues related to excessive vibration of the disk carrier bar.
Solutions for problems with the disk carrier bar not adapting to uneven ground.
How to fix issues where the disk carrier bar is not parallel to the ground.
Reasons and fixes for earth buildup between sliding blocks.
Troubleshooting the safety device that unhooks under impact.
How to correct problems related to stubble height being too high or sparse.
Addresses issues causing uneven stubble height along the cutting width.
Solutions for problems where forage is pushed forward before being cut.
Procedure for securing cutting components like knives and disks.
Inspection guide for mowing parts, including wear and tear.
Routine maintenance checks and procedures for the machine.
Details on oil changes, greasing points, and lubrication intervals.
Guidelines for preparing and storing the machine at the end of the season.
General| Brand | sitrex |
|---|---|
| Model | DM 6 |
| Category | Farm Equipment |
| Language | English |
To Next Page
