2) Guide to the signs and symbols used on the machine
IMPORTANT
These signs and symbols give information to the operator on how to make the best use of
the machine so as to prolong its life, avoid damage, optimize work and, above all, to avoid
injury to the operator and anyone within range of the machine. Note: most of the symbols
that you will find below are located on the machine, but some are only in this manual and
indicate how to act or what must be done during assembly, when maintenance or repairs
are being done, etc..
1) Before beginning operations, read the instruction
manual carefully.
2) Before doing any maintenance or repair work, stop the
machine at a suitable spot. Turn off the tractor motor, apply
the brake, remove the key from the ignition and consult this
manual.
3) This is a warning to wear proper personal protective
equipment when carrying out maintenance and repairs
To Next Page
Loading...
