SIUI CTS-9006 - COMPARISON; Differences between CTS-9006 and CTS-9009

Shantou Institute of Ultrasonic Instruments Co., Ltd.
III
COMPARISON
This operation manual shall apply to the CTS-9006/ CTS-9009 digital ultrasonic flaw detector. The
differences of the two models on functions and specifications are listed below:
CTS-9006 CTS-9009
Operating Frequency
1~4MHz(-6dB)
0.5~10MHz(-6dB)
1~4MHz(-6dB)
0.5~8MHz(-6dB)
2~15MHz(-6dB)
Rectify
Positive
Negative
Full
Filter
Positive
Negative
Full
Filter
RF
Ethernet Port
√
Probe Frequency Measurement
√
Cine
√
AWS D1.1/D1.5 welding code
Optional √
API 5UE
Defect Sizing Quantitative
Criteria
√
Curved Surface Correction
√
Crack Height Sizing
√
Echo Magnifier within gate
√
Amplitude B Scan
√
Special Thickness
Measurement Module
√
Cine Clips Saved to USB Disk
√
Data Memory
300 sets 500 sets
【Note】:The mark √ in the table above indicates the corresponding model has such function or
specification.
The compilation of this operation manual is based on the model CTS-9006, and the parameters and
the operation shall apply to the CTS-9006. As the operation of the CTS-9009 is compatible with the
CTS-9006, for additional functions and operation on the CTS-9009, please refer to Appendix D
.
Model
Item