Need help?Do you have a question about the SIUI CTS-9009 and is the answer not in the manual?
Details the usage and function of various ports on the system.
Provides the menu structure of the CTS-9006 digital ultrasonic flaw detector.
Details the measurement data area and refers to relevant figures and tables.
Shows the measurement data area with parameters and symbols explained.
Explains how to make general adjustments within submenus.
Details the functions and operations available in extended submenus.
Explains how to perform angle measurements using the system.
Introduces the DAC (Distance Amplitude Correction) function.
Describes the procedure for creating DAC curves for flaw evaluation.
Introduces the AVG (Amplitude Versus Distance) function.
Describes the procedure for creating AVG curves for flaw evaluation.
Details using PeakEcho for creating DAC curves.
Provides specific examples of system application in testing.
Demonstrates an application example based on JB/T 4730-2005 standard.
Illustrates an application example according to GB 11345-1989 standard.
Troubleshooting steps for when the system fails to power on.
Troubleshooting steps for when the system cannot be powered off.
Troubleshooting for issues with USB disk connection prompts.
Troubleshooting steps for printing failures.
Troubleshooting for battery charging problems.
Troubleshooting steps when no echo signal is detected.
Troubleshooting for issues creating DAC curves.
Troubleshooting for issues creating AVG curves.
Troubleshooting for incorrect depth readings with angle probes.
Troubleshooting for incorrect horizontal readings with angle probes.
Explains AWS D1.1/D1.5 welding level calculation.
Describes the Crack Height measurement function.
Explains API 5UE defect sizing using a quantitative method.
Details the CSC (Curved Surface Correction) function.
General| Brand | SIUI |
|---|---|
| Model | CTS-9009 |
| Category | Security Sensors |
| Language | English |
To Next Page
