Shantou Institute of Ultrasonic Instruments Co., Ltd.
IX
Preface
The CTS-9006/ CTS-9009 digital ultrasonic flaw detector is the perfect combination of various
advanced modern technologies such as ultrasonic flaw detection, computer, electronics, mould,
techniques. Therefore we present a series of digital ultrasonic flaw detectors with higher
performance and more powerful functions to the industry.
Main features of the CTS-9006/ CTS-9009 digital ultrasonic flaw detector:
1） Small size —— The dimension of the whole unit is 152mm×240mm×52mm (W×H×D). This is the
smallest size among all flaw detectors with a 5.7-inch monitor.
2） Light weight —— The total weight of the unit (including battery) is 1.15kg only.
3） Low consumption —— Given that the system has small size and light weight, a fully-recharged
battery can support the system to work continuously over 7 hours.
4） High performance ——The main technical specifications, such as detection sensitivity surplus,
vertical linearity, horizontal linearity and dynamic range, are much better than the requirements
of China’s national standard.
5） Rich functions —— The system is featured with USB port, auto gain control, peak memory, DAC,
AVG. Moreover, the CTS-9009 has many additional functions, such as network communication,
probe frequency measure, cine, curved surface correction and AWS code.
6） Easy operation —— The user-friendly system interface is quite intuitive with just a few buttons
for easy definition and simple operation.
This Operation Manual contains the following chapters:
Chapter 1 gives a brief introduction to the system.
Chapter 2 describes system menus and functional operation.
Chapter 3 describes some operation techniques, so as to facilitate the users to operate the system
quickly and conveniently.
Chapter 4 describes the general steps when performing field testing with the system, and gives
some application examples.
Chapter 5 describes how to use peripheral devices, ports and accessories.
To Next Page
Loading...
