HAVING TROUBLE? WANT LIVE HELP? CALL 310.982.2877 OR EMAIL TEAM@SIXTHREEZERO.COM.
Using a Phillips head screwdriver, loosen the bolt
in the bracket and slide the rear reflector over the
seatpost. Tighten anywhere on the seatpost that is of
uniform diameter.
08
Apply grease to seat lever. Holding the seat post firmly, insert
into seat post tube until the top is level with your waist.
Tighten the seat post clamp with a 6mm Allen key.
07
BICYCLE OR
AUTO GREASE
Make sure not to drop seat post into the frame.
CAUTION
PHILLIPS
SCREWDRIVER
TIGHTEN
6MM
SEAT
POST
6MM
ALLEN AKEY
REAR
REFLECTOR
Only install the rear reflector if it comes separate from the rear rack.
NOTE
To Next Page
Loading...
