HAVING TROUBLE? CALL 310.982.2877 OR EMAIL THETEAM@SIXTHREEZERO.COM
The lever should be tight enough to feel resistance at a 90º angle.
Make sure the front wheel is securely tightened and properly aligned so
there are no issues when you assemble the brakes.
NOTE
09
Lift the lever up towards the fork. If the lever does not
lock in place smoothly, loosen QR5 slightly and try again.
It will take a small amount of strength, but that is normal.
QR5
----
10
Once the front wheel is secured, lower the kickstand
and locate the front fender.
To Next Page
Loading...
