HAVING TROUBLE? WANT LIVE HELP? CALL 310.982.2877 OR EMAIL INFO@SIXTHREEZERO.COM.
Now tighten the stem clamp bolts evenly with the
handlebar assembly facing directly forward.
17 18
5 M M
ALLEN KEY
After making sure that the stem bolts are properly
tightened, use a 5mm allen key to re-install the top cap.
These bolts are designed to be tighten to correct torque. If you don’t have
access to a torque wrench, we suggest to visit your local bike shop for prop-
er tightening. If you decide to tighten the screws without a torque wrench,
make sure to tighten the bolts until they are snug. Do not overtighten. Bolts
that are too loose can move and fatigue. Bolts that are too tight can stretch
and deform. Either mistake can lead to a sudden failure of the bolt, causing
you to lose control and fall.
NOTE
To Next Page
Loading...
