WATCH ASSEMBLY VIDEOS ON OUR YOUTUBE CHANNEL, HTTPS://SIXTHREEZERO.COM/PAGES/ASSEMBLY
19 20
6 M M
ALLEN KEY
6 M M
ALLEN KEY
A good way to double check yourself would be to put your weight down on
the handlebars. If they don’t move, then they are secured properly.
NOTE
Loosen the bolts on the handlebar faceplate using a 6mm
Allen key.
Place handlebar between the stem and faceplate ensuring
that the ridges are centered and covered by the faceplate.
This will ensure that the handlebars are centered. Using
a 6mm allen key, tighten the stem faceplate bolts evenly
and secure the handlebars in place.
To Next Page
Loading...
