Need help?Do you have a question about the Skamol SKAMOTEC 225 and is the answer not in the manual?
General| Material | Calcium silicate |
|---|---|
| Thickness | 25 mm |
| Thermal conductivity | 0.065 W/mK |
| Fire resistance | Non-combustible |
| Density | 225 kg/m³ |
| Maximum Service Temperature | 1000°C |
| Application | Fireplace insulation, high-temperature insulation |
Steps for assembling the fireplace platform structure using screws and maintaining edge distance.
Instructions for fastening the top layers of Skamotec 225 boards using screws.
Guidance on ensuring the fireplace is level and square during the installation process.
Details on using 25 x 38 mm blocking for floor and ceiling support in fireplace construction.
Methods for constructing sidewalls using moistened boards and mortar cement with lap joints.
Instructions for moistening Skamotec 225 board surfaces before applying mortar cement for side panels.
Steps for moistening the surface of Skamotec 225 boards before applying mortar cement.
Fastening the lap joint panel using both screws and mortar cement, maintaining edge distance.
Locating and fastening the two Skamotec 225 boards against blocking and side panels.
Fastening the Skamotec 225 board at the bottom and top against blocking and side panels.
Using drywall filler to create a spotless finish, moistening boards before application.
Illustrates the placement of 25 mm x 38 mm blocking at corners.
Shows 25 x 38 mm blocking installed on the floor against the front/side panel.
Depicts 25 x 38 mm blocking installed against a side panel.
Provides a plan view of blocking, showing fastener locations and spacing.
Shows a cross-section of a lap joint panel connection with minimum spacing.
Details fastener locations and minimum edge distances for lap joint panels.
Illustrates the lap joint method for preassembling side panels with blocking and fasteners.
To Next Page