Need help?Do you have a question about the Skandika PITEA SUV and is the answer not in the manual?
Verify the tent is complete and in good condition, including all parts and accessories.
Prevent damage by avoiding extended exposure to direct sunlight.
Do not pitch tent directly under trees to prevent damage from falling debris or sap.
Remove stones, sharp objects, and debris from the ground before pitching the tent.
Carefully connect tent poles, ensuring connectors are fully inserted.
Insert longer poles into the roof sleeve sections and connect to pin system.
Secure poles with plastic hooks and ensure correct pole-to-pin system connection.
Position and fix all anchoring points with pegs, adjusting as needed for a taut inner tent.
Place the outer tent over the inner tent and secure with Velcro fasteners.
Use shorter poles to support the awning and straps to fix the tent to the vehicle.
Detach tent from vehicle, close all zippers, and remove items before dismantling.
Carefully remove poles from sleeves and fold/roll the tent from sides to center.
Stow the folded tent with poles and pegs in the carry bag.
Ensure tent is completely dry before packing to prevent mildew and rot.
Clean dirt with a soft sponge and clear water only; avoid detergents.
Protect from UV rays and re-apply seam sealer for longevity.
Increase ventilation and remove wet items to prevent internal condensation.
To Next Page
General
