Need help?Do you have a question about the SKC AIRCHEK 2000 and is the answer not in the manual?
Guide for properly installing the battery pack into the pump base.
Instructions for charging the battery pack using the charger.
Explanation of battery status icons and low battery fault indication.
Procedure for removing and replacing the battery pack.
Details on using the battery eliminator for extended operation.
Explanation of AirChek 2000 LCD display elements and icons.
Overview of the pump keypad buttons and their functions.
Description of RUN, HOLD, SLEEP, and Flow Fault modes.
How to check the current battery charge level on the pump's LCD.
Guide to accessing and using the pump's two-level user interface.
Instructions for setting and calibrating flow rate using Level One.
Instructions for setting sampling and display parameters using Level Two.
Procedure to reset accumulated volume and run time data to zero.
Steps to set the desired flow rate for the pump.
How to program the sampling time for STEL, TWA, or other run times.
Instructions for setting a delayed start for sampling operations.
Procedure to clear a previously set sample time.
Method to remove a DataTrac 2000 program from pump memory.
Explanation of flow rate and volume display on the pump's LCD.
Instructions for setting and calibrating flow rate for high flow rates.
Manual procedure to set and calibrate the pump's flow rate.
Using CalChek feature for single-point automatic flow rate calibration.
Procedure for setting up and running a constant flow sample.
Overview of low flow sampling requirements and accessories.
Steps to set and calibrate flow rate for single tube low flow sampling.
Procedure to adjust flow rate through the sorbent tube.
Steps for setting up and running a single tube sample.
Instructions for setting and calibrating flow rate for multiple tubes.
Procedure for adjusting flow rate through multiple sorbent tubes.
Steps for setting up and running a multiple tube sample.
Procedure for replacing the pump's inlet port housing and filter.
Procedure for performing a full, multi-point calibration using CalChek.
List of CalChek calibration errors and their troubleshooting steps.
Details on the DataTrac 2000 software for programming and data management.
General| Brand | SKC |
|---|---|
| Model | AIRCHEK 2000 |
| Category | Measuring Instruments |
| Language | English |
To Next Page