SKEDCO SKED - Page 2

ROLLING UP THE SKED
®
STRETCHER
1. LAY STRETCHER OUT FLAT WITH ALL
CROSS STRAPS CONNECTED.
**STEEL DOUBLE BAR BUCKLES: PLACE
RETAINER STRAP WITH INSIDE OF BUCKLE
FACING UP UNDER FOOT END OF SKED
®
.
(SEE PHOTO IN STEP 4)
2. STARTING AT THE HEAD END, ROLL
THE SKED
®
UP AS TIGHT AS POSSIBLE.
CONTINUE TO ROLL THE SKED
®
USING
KNEE TO KEEP THE ROLLED STRETCHER
SMALL.
3. WHILE HOLDING YOUR KNEE ON
THE ROLLED SKED
®
, FASTEN THE COBRA
BUCKLES OF THE FOOT END STRAPS TO
HOLD THE SKED
®
IN A TIGHT ROLL.
4. WHEN USING THE SKED
®
WITH STEEL
DOUBLE BAR BUCKLES, FASTEN THE PRE-
PLACED RETAINER STRAP TO BUCKLE AND
PLACE SKED
®
STRETCHER IN BACKPACK.
P.10