Need help?Do you have a question about the SKF TKED 1 and is the answer not in the manual?
General| Brand | SKF |
|---|---|
| Model | TKED 1 |
| Category | Security Sensors |
| Language | English |
TKED 1 detects electrical discharge within the frequency range of 50 MHz to 200 MHz.
Use the TKED 1 close to the bearing and avoid VFD controller vicinity for accurate detection.
The maximum measuring distance for the TKED 1 is 300 millimeters (11.8 inches).
Operate the unit using the on/off button; it switches off automatically after 5 minutes.
Toggle between infinite, 10, or 30 seconds for the measuring time.
Start and stop infinite measurements by pressing the start/stop button once.
Execute 10-second or 30-second measurements, or stop manually.
Enable or disable the backlit display by pressing the light symbol key for 1.5 seconds.
Replace batteries with 3x AAA Alkaline using a PZ2 screwdriver; view battery life.
Details on case dimensions, weight, and physical characteristics of the TKED 1.
Information on storage and service temperature ranges for optimal device performance.
List of items included in the TKED 1 kit and the designation for spare parts.
To Next Page
