SKF Vibracon chock Application and Installation Guide
2 2018 – version 2
1. Executive Summary
The SKF Vibracon chock is a universal re-
adjustable steel chock. Universal refers to the fact
that an SKF Vibracon chock can be used instead of
rigid steel chocks, steel shims or epoxy resin.
Re-adjustable refers to the possibility of re-
adjusting the chock at every re-alignment action.
The name ”SKF Vibracon” chock suggests that the
chock can absorb vibrations like a resilient mount
(vibration damper).
We want to point out that the SKF Vibracon chock
is absolutely not a resilient mount. The name has
been derived from “Vibration Conducting” steel
mount.
SKF Vibracon chock is a permanent, strong and re-
usable mounting chock for all types of rotating and /
or critically aligned machinery.
The SKF Vibracon chock is a mechanically stiff
chock that makes accurate mounting and alignment
simple and quick.
The SKF Vibracon chock advantages are:
x Eliminates “Soft Foot”
x Save installation time and costs
x Self-leveling
x Re-adjustable / Re-usable
x Chock fast, no curing time required
x No special installation skills required
x Green solution
The SKF Vibracon chock has many configurations
and material options to fulfill specific technical
requirements, and is being used in end user
applications as well as service projects.
The principle of the SKF Vibracon chock is:
x A self-leveling spherical top plate
x An adjustable center plate
x A rigid bottom plate
This configuration is in re-adjustable in height and
accommodates angular differences up to 4°.
In this application guide we will inform you about all
aspects of the SKF Vibracon chock.
If you have further questions or if you need
additional information do not hesitate to contact us
through: vibracon@skf.com.
To Next Page
Loading...