Skidmore-Wilhelm MZ-100 - User Manual

442 SOUTH GREEN ROAD
SOUTH EUCLID, OHIO 44121 USA
VOICE: 216-481-4774
FAX: 216-481-2427
www.skidmore-wilhelm.com
USER MANUAL
MODEL MZ-100
BOLT TENSION CALIBRATOR

Summary

Introduction to the Bolt Tension Calibrator

Safety First Guidelines

Crucial safety precautions and warnings for operating the calibrator.

Principle of Operation

Calibrator Setup and Operation

Mounting the Calibrator Securely

Instructions on how to securely attach the calibrator to a rigid surface.

Installing Calibrator Adaptors

Installing the Fastener Assembly for Testing

How to Read the Calibrator Gage

General Testing Procedures

Important Testing Considerations and Warnings

Key points and warnings for performing various testing procedures.

Testing Tension Control (TC) Bolts

Testing F959 Direct Tension Indicating (DTI) Washers

Testing F959 DTI Washers (Continued)

Rotational Capacity (ROCAP) Testing

ROCAP Testing Safety and Torque Considerations

Calibration and Re-calibration Procedures

Re-calibration and Shipping Guidelines

Calibrator Maintenance Requirements

Skidmore-Wilhelm MZ-100 Specifications

General

Brand	Skidmore-Wilhelm
Model	MZ-100
Category	Test Equipment
Language	English