To Next PageTo Next Page
Need help?Do you have a question about the Skil 1470 and is the answer not in the manual?
General| Brand | Skil |
|---|---|
| Model | 1470 |
| Category | Power Tool |
| Language | English |
Read all safety warnings and instructions. Failure to follow may result in electric shock, fire or serious injury.
Keep work area clean and well lit. Cluttered or dark areas invite accidents.
Power tool plugs must match the outlet. Never modify the plug. Do not use adapter plugs with earthed power tools.
Stay alert, watch what you are doing. Do not use power tool when tired or under influence of drugs, alcohol or medication.
Do not force the power tool. Use the correct power tool for your application for better and safer job.
Have your power tool serviced by a qualified repair person using only identical replacement parts.
Tool not for people under 16. Use unrolled extension cords with 16 Amps capacity.
Hold tool by insulated gripping surfaces. Keep hands away from cutting area.
Dust may be harmful. Wear dust mask and work with dust extraction device.
Do not connect blue or brown wire to the earth terminal of the plug.
Disconnect plug, remove/mount accessory, ensure openings engage tool head tabs.
Disconnect plug, loosen screw A with hex key B, check tight seating.
Clean VELCRO material, mount sheet, ensure perforation matches sanding foot.
Mount dust extraction device, connect vacuum cleaner. Do not use for metal sanding.
Switch on/off by pushing switch E. Tool should run at full speed before contacting workpiece.
Use wheel F to adjust frequency from low (1) to high (6). Optimal speed depends on material.
Hold tool at grey grip areas. Keep ventilation slots uncovered. Do not apply excessive pressure.
Use for separating and plunge cuts in wood, plaster, gypsum, plastics near edges.
Use for separating and deep plunge-cuts in wood, plaster, gypsum, soft plastics near edges.
Keep tool and cord clean. Disconnect plug before cleaning. Tool not for professional use.
Send tool undismantled with proof of purchase to dealer or SKIL service station.
Do not dispose of with household waste. Return to an environmentally compatible recycling facility.
Sound pressure level is 92 dB(A), sound power level 103 dB(A).
Measured vibration levels for sanding and cutting. Compare tools or assess exposure.
